Smart Meter Verification software allows users to fine tune and adjust their engineering processes to ensure absolute measurement confidence and top performance.
Advanced Smart Meter Verification diagnostics to deliver real-time intelligence and calibration of Coriolis and magnetic flow meters for a complete process overview and greater operational certainty.
Emerson has launched the latest version of its Smart Meter Verification software for Coriolis and magnetic flow meters, providing flow meter verification on demand and empowering process engineers, technicians and operators to look beyond the meter and make real-time decisions based on the most advanced meter and process diagnostics in the industry today.
New tools in the Smart Meter Verification software allow users to fine tune and adjust their engineering processes to ensure absolute measurement confidence and top performance in the chemicals, food and beverage, life sciences, oil and gas, and other process industries. In addition to onboard diagnostics, Smart Meter Verification also accelerates implementation of companies’ Industrial Internet of Things (IIoT) strategies with its powerful remote diagnostics, digital intelligence and multiple data points providing users with a complete process overview and greater operational certainty.
Rather than costly and time-consuming calibrations and laboratory testing, leading to production interruptions, shut-downs and safety concerns, the advanced Smart Meter Verification provides in situ calibration verification on-demand without any impact on process or meter outputs. The new system also provides operators with crucial information on other flow issues across the plant.
“Whereas traditional diagnostics often provide just an entry point to further, time-consuming analysis, the Smart Meter Verification system generates real-time, decision-making intelligence and flow measurement confidence here and now,” said Taylor Scott, software product specialist, Emerson Automation Solutions. “For plant operators and engineers, this move from reactive to predictive diagnostics means improved knowledge, operational certainty and productivity, and the acceleration of IIoT strategies.”
Key features of the advanced Smart Meter Verification include:
- Innovative algorithms that detect corrosion and erosion in the meter with remedial action able to be instigated immediately. Emerson is also the first company to integrate a 99 percent-confidence statistical meter damage detection algorithm that enables early detection without false alarms.
- New process diagnostic capabilities that include a “flow range” diagnostic, which alerts the engineer when flow rates are not within the specified range of the meter; instrument diagnostics that can identify if entrained gas is in the process; and immediate alerts to process upsets that may affect measurement performance, such as severe aeration.
- Tube coating diagnostics that offer crucial data points and drive valuable information to the end user, alerting them when the meter is coated by something unexpected from the process line, particularly important in food and beverages and life sciences applications.
- Clear and transparent verification audit trails, and advanced visual analysis and reporting software that meets third party regulatory agency compliance requirements in lieu of meter calibration, inspection or removal. By providing a time-stamped verification report, an increasing number of international standards and third-party agencies, such as ISO, IEC, AGA, API, NMI and others, recognise verification technologies, such as Smart Meter Verification, as a method to confirm instrument calibration and extend recalibration or proving intervals.
- Reduced meter maintenance requirements with vital variables, such as mass flow, verified to be within factory accuracy specifications. Smart Meter Verification also generates detailed information on all sensors, including serial numbers, condition temperature and calibration information, ensuring a simple path to instrument and process compliance.
Emerson’s Smart Meter Verification diagnostics are an easy-to-use, automatic tool for Micro Motion™ Coriolis and Rosemount™ magnetic flow meters that monitor the entire flow meter’s performance and integrity and are applicable in a wide variety of process industry sectors, such as oil and gas, food and beverage and chemicals.
Bürkert UK stock-holding for standard everyday process products
Aiming to minimise the complexity of process control projects in a number of industries; from water to food & beverage and pharma, Bürkert UK has massively increased its product range and its UK stock-holding for standard everyday process products.
Bürkert now holds a wide variety of the more common valve designs including ball valves, butterfly valves and quarter-turn valves in standard sizes on the shelf. This increase in the product line represents a considerable investment in stock-holding, with over £1 million worth of stock now held in the UK, to compliment industry recognised angle seat, globe and control valve packages.
Neil Saunders Bürkert UK General Manager explains the move, “Quite simply we are adding convenience for our customers by offering more of what our systems customers and distribution partners want on a same day / next day availability basis.
“Bürkert offers over 100,000 catalogue items from commodity solenoid valves to high-precision food and pharmaceutical grade products, however while lots of the clever, problem solving items we are famous for are made to order, there are also standard valves required for almost any project. They don’t have exotic specifications and tend to be sourced when they are needed. If customers can have a Bürkert model, available straight away, then the quality and the brand reputation that goes with that is an added bonus for them.”
Cost effective solutions
Cost pressures are everywhere, so conformity of fit and compatibility can make a big difference in ensuring a process automation project is commercially successful. Hence, all our new products complement the existing range of more specialist valves and are designed to work in harmony with Bürkert’s numerous pneumatic and electric actuators and control heads. Every product is quality audited and built to the highest standards with full traceability of materials and certifications provided on request.
This improved product offering enables Bürkert to deliver a more comprehensive solution, especially for larger scale projects where consolidation of supply is a significant factor. Now, Bürkert can provide a cost-effective package that is supported by expert design and specialist application knowledge, as well as on-demand supply of more general-purpose process valves for water, steam and air.
This reduces costs for project teams and greatly simplifies the purchasing process by involving much fewer vendors and cutting the number of purchase orders that need to be raised. Other savings can also be made thanks to Bürkert’s knowledge and expertise being applied to a much greater part of the installation
Real-world savings example
The principle is neatly illustrated by a recent project for a biotech company that previously had only used Bürkert to supply its specialist products. The original quote was for several ball valves with actuators, integral pilot valves and feedback switches for use in Zone 1 (potentially explosive atmospheres), all from stock.
Having submitted the quote, the electrical department from the same customer subsequently contacted Bürkert looking for a number of ATEX pneumatic control panels. Further discussions about where the panels would be used revealed that they were for the same project as the ball valves.
Due to the nature of the working environment, the electricians did not want to run two armoured cables to the valve, one for the pilot valve on the side of the actuator and another for the switch box. The aim was to use the additional control panels to reduce the amount of cabling going to the valves.
The Bürkert engineers then explained that the ball valves that had been already quoted for the project included an integral switch box with the pilot valve inside it, so only one multi-core cable would be required. As a result, the additional control panels would not be required, saving the customer approximately £80,000.
By increasing the range of products available, Bürkert UK is better placed as a project partner, offering high quality products, vast design expertise and customised logistics for improved project efficiency.
With larger scale projects involving hundreds of valves, potentially from numerous suppliers, maintaining an effective logistics process can be difficult. As an integral supply partner to a project, Bürkert can implement a customised logistics process that packages together all the components for a specific area of the installation. Deliveries are timed with the build process and tagged to ensure they are delivered to exactly the right location, saving time and money on the installation.
As a one-stop shop for process control components, Bürkert aims to help customers with the design, procurement and installation of new and replacement equipment, as well as support its distribution partners with better access to a wider range of product. Now, with a massive UK stock-holding, it can provide immediate delivery on a wide range of common products as well as sourcing more complex, application specific components within a short timeframe.
Rotork is CMA range expands for improved control valve automation
The new actuator is capable of a maximum 4,500 lbf (20 kN) seating thrust. The new sizes increase the CMA range modulating thrust performance to 3,000 lbf (13 kN) with a 114.3 mm (4.5”) stroke length for the automation of larger valves with higher pressure ratings. The combined performance of the CMA and the larger CVA ranges enables Rotork is innovative electrical control valve actuation technologies to be applied to process control applications of virtually any size and description.
CMAs are robust enough to handle extreme temperature swings, corrosive environments and are also available for explosionproof areas. The CML-1500 and CML-3000 models, including those with hazardous area approvals, are watertight to IP68 for temporary submersion (7 metres, 72 hours). The optional Reserve Power Pack (RPP) uses supercapacitors to provide the actuator with enough stored energy to perform predetermined action on mains power failure, such as moving to the fully closed position, fully open position or anywhere in between. Manual operation is available as standard.
The cost-effective electric solution is suitable for a wide variety of applications found in sectors such as power generation, chemicals, petrochemicals and the majority of other process industries. The new sizes are ideal for linear valve control with modulating duty, generally in remote locations, such as oil pipelines and remote gas extraction stations where power supplies are limited. Single-phase or DC electrical power is all that is required for control valve actuation, saving the installation and on-going costs associated with instrument air supplies. Simple cabling replaces cumbersome lines and hoses, eliminating freezing and leaking problems.
The CMA is a low power consumption solution (less than 1 Watt at standby) for automation in established or remote installations such as oil installations and offshore facilities where there are pneumatic limitations. The design allows for solar powered and battery back-up supplies in remote locations where electric energy consumption is a concern and power is often provided through solar collection for the operation of remote automated critical systems such as wellheads. The new sizes retain all the features and benefits of the established CMA range of compact modulating actuators, providing continuous modulation with 0.1% accuracy for the most demanding process control applications.
New Alfa Laval Mixproof 3-body valve designed for hygienic processes
Looking for optimal process flow, outstanding hygiene, maximum uptime and low total cost of ownership?
The Alfa Laval Unique Mixproof 3-body valve with its modular, three-valve-body design provides reliable fluid handling and safety, making it perfect to use as a changeover valve for hygienic industries such as food, dairy, beverage and home-personal care. This translates into substantial savings and efficiency gains.
Cost-effective mixproof valve
Get exceptional results and save money by replacing two or more valves of other types with a single Alfa Laval Unique Mixproof 3-body valve. Two independent plugs and the fully balanced design enable two different fluids to pass through the same valve without risk of cross-contamination even in the event of pressure shock.
Exceptional spillage-free operation
Ensuring safe and hygienic operation, the double-seat design avoids cross-contamination while the double lip seals provide added protection for you to enjoy long-lasting, spillage-free operation.
Easy maintenance & optimal cleanability
Maintenance and cleaning are quick and easy due to a top-loaded design, no adjustable components, maintenance-friendly actuator and built-in leakage detection on all seals.
The Alfa Laval Unique Mixproof 3-body valve is always equipped with seat lift and seat push function hence meets stringent hygienic standards.
Easy to configure and upgrade
Optimize your hygienic process by customizing the Alfa Laval Unique Mixproof 3-body to suit your needs. Its modular design also makes it easy to apply the double seat valve whenever your process needs change while ensuring efficient, hygienic and continuous production.
You get the full benefit of using Alfa Laval Unique Mixproof valves by combining them with Alfa Laval ThinkTop and ThinkTop Basic valve sensing and control units.
Valves1 year ago
The tips on maining a foot valve
Genel2 years ago
Valves2 years ago
WEY new generation Knife Gate Valves by ; Sunsay
Expansion Joints11 months ago
More go with better flow
Electric Motors2 years ago
NSK develops insulated bearings for inverter motors
Pumps2 years ago
Indar, Colorado River Basin is helping to combat drought
Valves11 months ago
New ORBINOX knife gate valve for Water Treatment Applications
Pumps12 months ago
BJM Expands KB Series – Larger KB220 model